TotalCount
Dual Sensor Head People Counter
This People
Counter uses a pair of push-in style eye-beams – one each side of the
entrance – usually in the door jams. These Dual Sensor Heads (DSH) are
basically the type used in auto doors to stop the doors closing if
someone stands in the doorway.
Dual Sensor Heads
When installed these
Sensor Heads being quite small – 15 mm in diameter and a neutral black
- go virtually unnoticed. For shops the suggested height for
installation is 1.3 metres – to not count small children, shopping
trolleys and prams.
Having a Sensing range of up to 10
metres the DSH suits auto doors and wider opening where
extremely small discrete sensors are needed.
Theses sensors are made in
Australia work well in harsh environments and like all our sensors not
affected by sunlight.
Control
Module
This contains the
electronics for the Sensor Heads and communicates to the Counter
Module. The Control Module in a matt black lugged box 111 x 67 36 mm.
The
TotalCount DES3 Counter Module
The Counter is an 8 digit LCD
display with a digit height of 8 mm. The unit can handle really high
numbers and is clear and easy to read.
To Reset the
Counter to Zero a Magnet is applied externally to the
right of the LCD – two Magnets are included in the pack.
The Counter Module and
accompanying electronics are housed in a matt black lugged box
measuring 66 x 50 x 34 mm.
The Pack Contains:
- Two Sensor Heads each with 4
metres of Shielded Cable
- DSH Control Module
- TotalCount Counter Module
- 9-Volt DC Unregulated
Plug-Pack.
- Screws etc for ease of
installation.
- Magnets (2)
- Instruction Leaflet
The TC- DSH can also come with Auto-Halve, Battery Back-Up
and Addmitter
Transmitter/Receiver
Cost: $360.00 plus GST and
Freight = $407.00

Ordering Code: TC-
DSH
|