MONITOR
People Counter - Addmitter
Our MONITOR People Counters are
designed to be easy to set-up and simple to operate.
The Addmitter has two modules –
a Sensor Module with a Transmitter and a Counter Module with a Receiver
and an optional Alert Beeper with volume adjustment and on/off switch.
The Sensor Module
is set-up at the doorway and the Counter Module
can be up to 30 metres away. There is no need to run cable between the
two modules – the Sensor Module transmits a pulse to the Counter Module
as people walk through the doorway.
The Sensor Module
Bracket positions the Sensor out 50mm from the mounting surface which
is ideal past/around auto doors.
Counter Module
The Counter is an 8 digit
LCD display with a digit height of 8 mm. The unit can handle really
high numbers and is clear and easy to read.
To Reset the
Counter to Zero a Magnet is applied externally to the
right of the LCD – two Magnets are included in the pack.
The unit can be set up in seconds - it’s that simple!
The Pack Contains:
- Addmitter Sensor Module with
M50 Transmitter
- Counter Module with M50
Receiver
- Matt Black Multi Directional
Bracket to mount Sensor Module
- 9-volt Plug-Packs (2)
- Reflector measuring 50 x 50
mm*
- Reflector Bracket
- Mounting Screws, Magnets (2)
and Instruction Sheet
Cost of Addmitter
People Counter
$360.00 plus GST and Delivery = Total $407.00
Cost of Addmitter
People Counter with Piezo Alert option
$390.00 plus GST and Delivery = Total of $440.00
*The Addmitter Sensor has a
range to 4 metres with the standard 50 x 50 mm Reflector and up to 5.5
metres with our 80 x 80 mm Reflector.
The 80 x 80mm
Reflector adds $30.00 plus $3.00 GST to the above costs.
Ordering Code:
Addmitter People Counter
Addmitter People Counter with Piezo Alert
|
